Hyundai Kona: Coupling Assembly / Pressure Sensor Description and operation

The 4WD ECU makes a Motor Pump (Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status.

Oil hydraulic Motor(Actuator) Repair procedures

Inspection    • If you have trouble code related to the oil hydraulic motor (actu ...

Pressure Sensor Repair procedures

Inspection    • If you have trouble code related to the pressure sensor check pre ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Battery Sensor Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. Battery negative (-) terminal tightening nut : 7.8 - 9.8 N.m (0.8 - 1.0 kgf.m, 5.8 - 7.2 lb-ft) ...

Hyundai Kona (OS) 2018-2025 Service Manual: BJ Boot Components and components location
Components (1) [Gamma 1.6 T-GDI, Nu 2.0 MPI] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Snap ring 12. TJ case ...