Hyundai Kona: Seat Belt Pretensioner / Description and operation

Hyundai Kona (OS) 2018-2024 Service Manual / Restraint / Seat Belt Pretensioner / Description and operation

Description

The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the seat belt webbing. This prevents the front occupants from thrusting forward and hitting the steering wheel or the instrument panel when the vehicle crashes.

(Seat belt pretensioner may be activated in side impact collisions if the vehicle has side airbag or crutain airbag.)

•	Never attempt to measure the circuit resistance of the Seat Belt Pretensioner (BPT) even if you are using the specified tester. If the circuit resistance is measured with a tester, the pretensioner will be ignited accidentally. This will result in serious personal injury.

Components and components location

Components 1. Seat Belt Pretensioner (BPT) 2. Rear Seat Belt Pretensioner ...

Repair procedures

Removal Front seat belt pretensioner (BTP) 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Repair procedures
Adjustment Glass Adjustment • Check the glass run channel for damage or deterioration, and replace it if necessary. 1. Remove the ...

Hyundai Kona (OS) 2018-2024 Service Manual: Rear Door Belt Inside Weatherstrip Repair procedures
Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Remove the rear door belt inside weatherstrip (A). 3. To install, reverse removal procedure. ...