Hyundai Kona: Specifications & Consumer information / Tires and wheels
.png)
NOTICE
- It is permissible to add 20 kPa (3 psi) to the standard tire pressure specification if colder temperatures are expected soon. Tires typically lose 7 kPa (1 psi) for every 7°C (12°F) temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated.
- An air pressure generally decreases, as you drive up to a high-altitude area above sea level.Thus, if you plan to drive a high-altitude area, check the tire pressures in advance. If necessary, inflate them to a proper level (Air inflation per altitude: +10 kPa/1 km (+2.4 psi/1 mile)).
- Must do not exceed maximum inflation pressure shown on equipped tire sidewall.
CAUTION
When replacing tires, use the same size originally supplied with the vehicle.
Using tires of a different size can damage the related parts or make it work irregularly.
Bulb wattage
...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Engine Control Module (ECM) Schematic diagrams
ECM Terminal and Input/Output
signal
ECM Terminal Function
Connector [A]
Pin No
Description
Connected to
1
Ignition coil (Cylinder #4) control output
Ignition coil (Cylinder #4)
...
Hyundai Kona (OS) 2018-2025 Owners Manual: Jump starting procedure
1. Position the vehicles close enough that the jumper cables will reach, but
do not allow the vehicles to touch.
2. Avoid fans or any moving parts in the engine compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as radios, lights, air condition ...