Hyundai Kona: Repair procedures / SRSCM Components and components location

Hyundai Kona (OS) 2018-2025 Service Manual / Restraint / Repair procedures / SRSCM Components and components location

Components

1. Front right Pressure Impact Sensor (FIS)
2. Supplemental Restraint System Control Module (SRSCM)
3. Front left Pressure Impact Sensor (FIS)
4. Pressure Side Impact Sensor (P-SIS
5. Gravity Side Impact Sensor (G-SIS)

Repair procedures
Component Replacement After Deployment    • Before doing any SRS repairs, use the GD ...

SRSCM Schematic diagrams
Circuit Diagram ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

Hyundai Kona (OS) 2018-2025 Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 2 and 5 [B1/S1]. 4. Measure resistance between the HO2 ...

© 2018-2025 www.hkona.com