If the shift lever cannot be moved from the P (Park) position into R (Reverse) position with the brake pedal depressed, continue depressing the brake, and then do the following:
1. Place the ignition switch in the LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap (1) covering the shift-lock access hole.
4. Insert a tool (e.g. flathead screwdriver) into the access hole and press down on the tool.
5. Move the shift lever while holding down the screwdriver.
6. Remove the tool from the shiftlock release access hole then install the cap.
7. Depress the brake pedal, and then restart the engine.
If you need to use the shift-lock release, we recommend that the system be inspected by an authorized HYUNDAI dealer immediately.
Hyundai Kona (OS) 2018-2024 Owners Manual: Exterior features
Roof rack
If the vehicle has a roof rack, you can load cargo on top of your vehicle.
NOTICE
If the vehicle is equipped with a sunroof, be sure not to position cargo onto
the roof rack in such a way that it could interfere with sunroof operation.
NOTICE
When carrying cargo on the roof rack, take ...
Hyundai Kona (OS) 2018-2024 Owners Manual: Resetting the sunroof
The sunroof may need to be reset if the following conditions occur:
- The battery is discharged or disconnected or the sunroof fuse has been replaced
or disconnected - The sunroof control lever is not operating correctly
To reset the sunroof, perform the following steps:
1. Place the ignition switc ...