If the remote key does not operate normally, you can lock or unlock the door by using the mechanical key.
To unfold the key, press the release button then the key will unfold automatically.
To fold the key, fold the key manually while pressing the release button.
NOTICE
Do not fold the key without pressing the release button. This may damage the key.
Remote key precautions
The remote key will not work if any of the following occur:
If the remote key does not work correctly, open and close the door with the mechanical key. If you have a problem with the remote key, it is recommended that you contact an authorized HYUNDAI dealer.
If the remote key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone’s normal operational signals.
This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails.
Avoid placing the remote key and your mobile phone in the same location and always try to maintain an adequate distance between the two devices.
Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If the keyless entry system is inoperative due to changes or modifications not expressly approved by the party responsible for compliance, it will not be covered by your manufacturer’s vehicle warranty.
NOTICE
Keep the remote key away from electromagnetic materials that block electromagnetic waves to the key surface.
Hyundai Kona (OS) 2018-2025 Owners Manual: Drive mode integrated control system
The drive mode may be selected according to the driver's preference or road condition.
The system resets to be in the COMFORT mode (except if it is in ECO mode), when
the engine is restarted.
Information
If there is a problem with the instrument cluster, the drive mode will be
in COMFORT mode and ...
Hyundai Kona (OS) 2018-2025 Service Manual: Positive Crankcase Ventilation (PCV) Valve Repair procedures
Removal
1.
Disconnect the PCV hose (A).
2.
Remove the PCV valve (B).
Inspection
1.
Insert a thin stick (A) into the PCV valve (B) from the threaded side
to check that the plunger moves ...