Hyundai Kona: Scheduled maintenance services / Maintenance Under Severe Usage and Low Mileage Conditions (Gasoline Engine, for Europe)
The following items must be serviced more frequently on cars mainly used under severe and low mileage driving conditions. Refer to the chart below for the appropriate maintenance intervals.
R : Replace
I : Inspect and if necessary, adjust, correct, clean or replace
.png)
.png)
Severe driving conditions
A : Repeatedly driving short distance of less than 8 km (5 miles) in normal temperature
or less than 16 km (10 miles) in freezing temperature
B : Extensive engine idling
or low speed driving for long distances
C : Driving on rough, dusty, muddy, unpaved,
graveled or salt spread roads
D : Driving in areas using salt or other corrosive
materials or in very cold weather
E : Driving in the heavy dust condition
F
: Driving in heavy traffic area
G : Driving on uphill, downhill, or mountain roads
repeatedly
H : Towing a trailer, or using a camper or roof rack
I : Driving
as patrol car, taxi, commercial car or vehicle towing
J : Driving over 170 km/h
(106 mile/h)
K : Frequently driving in stop-and-go conditions and under 15,000
km per year.
Normal Maintenance Schedule (Gasoline Engine, for Europe)
I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace
or change. ** : The engine oil level should be checked regularly and maintained
properly. Operating with an insufficient ...
Normal Maintenance Schedule (Gasoline Engine, except Europe)
I : Inspect and if necessary, adjust, correct, clean or replace. R : Replace
or change.
...
Other information:
Hyundai Kona (OS) 2018-2025 Owners Manual: High beam operation
To turn on the high beam headlamp, push the lever away from you. The lever will
return to its original position.
The high beam indicator will light when the headlamp high beams are switched
on.
To turn off the high beam headlamp, pull the lever towards you. The low beams
will turn on.
WARNING
Do ...
Hyundai Kona (OS) 2018-2025 Service Manual: Repair procedures
Inspection
ESP System Bleeding
This procedure should be followed to ensure adequate bleeding of air and filling
of the ESC unit, brake lines and master cylinder with brake fluid.
1.
Remove the reservoir cap and fill the brake reservoir with brake fluid.
...