Hyundai Kona: ISG (Idle Stop & Go) System / Starter Components and components location
| Component |
| 1. Front
housing 2. Stop ring 3. Stopper 4. Overrun clutch assembly 5. Internal gear assembly 6. Planetary shaft assembly 7. Planetary gear assembly 8. Packing 9. Shield |
10. Lever
plate 11. Lever packing 12. Lever 13. Magnet switch assembly 14. Armature assembly 15. Yoke assembly 16. Brush holder assembly 17. Through bolt |
Starter Specifications
Specification
Item
Specification
Rated voltage
12V, 1.3 kw
The number of pinion teeth
11
...
Starter Schematic diagrams
Circuit Diagram
...
Other information:
Hyundai Kona (OS) 2018-2024 Service Manual: Auto Light Sensor Repair procedures
Inspection
Check if the auto light control operates like a timing chart shown below.
Tail lamp output and head lamp (Low) output is controlled based on the auto
light sensor's input (illumination intensity) when the Auto Light Switch
in Multi-Function Switch is ...
Hyundai Kona (OS) 2018-2024 Owners Manual: Starting the engine
WARNING
Always wear appropriate shoes when operating your vehicle. Unsuitable
shoes, such as high heels, ski boots, sandals, flip-flops, etc., may interfere
with your ability to use the brake, accelerator and clutch pedals.
Do not start the vehicle with the accelerator pedal depressed. The
...
