Hyundai Kona: Engine Mechanical System / Intake and Exhaust System
- Air Cleaner Components and components location
- Air Cleaner Repair procedures
- Intake Manifold Components and components location
- Intake Manifold Repair procedures
- Exhaust Manifold Components and components location
- Exhaust Manifold Repair procedures
- Intercooler Components and components location
- Intercooler Repair procedures
- Turbo Charger Components and components location
- Turbo Charger Repair procedures
- Muffler Components and components location
- Muffler Repair procedures
Oil Cooler Repair procedures
Removal
1.
Loosen the drain plug and drain the coolant. Open the radiator cap to
make rapid draining.
(Refer to Cooling System - "Coolant")
...
Air Cleaner Components and components location
Components
1. Air cleaner body
2. Air cleaner element
3. Air cleaner upper cover
4. Air duct
5. Air intake hose
6. Breather hose
7. Resonator
...
Other information:
Hyundai Kona (OS) 2018-2025 Service Manual: Repair procedures
Replacement
1.
Remove the plug hole (A).
2.
Remove the cap and the nuts, and then remove the wiper arm (A).
Tightening torque :
22.6 - 26.5 N.m (2.3 - 2.7 kgf.m, 16.6 - 19.5 lb-ft)
...
Hyundai Kona (OS) 2018-2025 Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls
the passage between the canister and the intake manifold. It is a solenoid valve
and is open when the ECM grounds the valve control line. When the passage is
open (PCSV ON), fuel vapo ...