Hyundai Kona: Child restraint system (CRS) / Installing a Child Restraint System (CRS)

WARNING

Before installing your Child Restraint System always:

Read and follow the instructions provided by the manufacturer of the Child Restraint System.

Failure to follow all warnings and instructions could increase the risk of the SERIOUS INJURY or DEATH if an accident occurs.

WARNING

If the vehicle headrest prevents proper installation of a Child Restraint System, the headrest of the respective seating position shall be readjusted or entirely removed.

After selecting a proper Child Restraint System for your child and checking that the Child Restraint System fits properly on the seating position, there are three general steps for a proper installation:

CAUTION

A Child Restraint System in a closed vehicle can become very hot.To prevent burns, check the seating surface and buckles before placing your child in the Child Restraint System.

Child Restraint System types
There are three main types of Child Restraint Systems: rearward-facing, forward-facing and booster Child Restraint Systems. They are classified according to the child’s age, height and weight. Rear ...

ISOFIX anchorage and top-tether anchorage (ISOFIX anchorage system) for children
The ISOFIX system holds a Child Restraint System during driving and in an accident.This system is designed to make installation of the Child Restraint System easier and reduce the possibility of imp ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Back View Camera System Components and components location
Component Location 1. Back view camera 2. AVN monitor ...

Hyundai Kona (OS) 2018-2025 Service Manual: Ambient Temperature Sensor (ATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ATS connector. 3. Measure resistance between the ATS terminals 1 and 2 [B1/S1]. 4. Check that the resistance is within ...

© 2018-2025 www.hkona.com