Hyundai Kona: Hood / Hood Latch Release Handle Repair procedures

Hyundai Kona (OS) 2018-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement

1.	Using a socket (B), remove the hood release handle (A).

To install, reverse removal procedure.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks / unlocks and opens / closes properly.

Hood Latch Release Handle Components and components location

Component Location 1. Hood latch release handle ...

Hood Latch Components and components location

Component Location 1. Hood latch assembly ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Troubleshooting
Troubleshooting Symptom Suspect Area Remedy Engine will not crank Battery charge low Charge or replace battery Battery cables loose, corroded or worn out Repair or replace cables ...

Hyundai Kona (OS) 2018-2024 Service Manual: Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connec ...