Hyundai Kona: Engine Control System / Exhaust Gas Temperature Sensor (EGTS) Specifications
Hyundai Kona (OS) 2018-2024 Service Manual / Engine Control / Fuel System / Engine Control System / Exhaust Gas Temperature Sensor (EGTS) Specifications
| Specification |
Exhaust Gas Temperature Sensor (EGTS) #1, 2
▷ Type : Thermistor type
|
Temperature [°C (°F)] |
Resistance (kΩ) |
|
-40 (-40) |
0.17 |
|
0 (-32) |
0.201 |
|
100 (212) |
0.276 |
|
200 (392) |
0.35 |
|
300 (572) |
0.42 |
|
400 (752) |
0.489 |
|
500 (932) |
0.555 |
|
600 (1112) |
0.618 |
|
700 (1292) |
0.68 |
|
800 (1472) |
0.739 |
|
850 (1562) |
0.767 |
Exhaust Gas Temperature Sensor (EGTS) Description and operation
Description
Installed in exhaust manifold, the Exhaust Gas Temperature Sensor (EGTS) #1
for WGT senses the temperature of exhaust gas flowing into the WGT.
Installed in Gasoline ...
Exhaust Gas Temperature Sensor (EGTS) Schematic diagrams
Circuit Diagram
EGTS #1
Harness Connector
EGTS #2
Harness Connector
...
Other information:
Hyundai Kona (OS) 2018-2024 Service Manual: Rear Disc Brake Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from the rear hub.
Tightening torque :
107.9 - 127. ...
Hyundai Kona (OS) 2018-2024 Service Manual: Muffler Repair procedures
Removal and Installation
Front Muffler
1.
Remove the engine cover.
(Refer to Engine and Transaxle Assembly - "Enginer Cover")
2.
Disconnect the battery negative terminal.
3.
Disconnect the ...
© 2018-2024 www.hkona.com
