Hyundai Kona: Emission Control System / Description and operation

Hyundai Kona (OS) 2018-2025 Service Manual / Emission Control System / Description and operation

Description

Emissions Control System consists of three major systems.

–	Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).

–	Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.

–	Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.

Specifications

Specifications Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 18.5 - 22.5 ...

Troubleshooting

Troubleshooting Symptom Suspect area Engine will not start or stuggle to start Vapor hose damaged or disconnected ...

Other information:

Hyundai Kona (OS) 2018-2025 Service Manual: Components and components location
Components 1. Glass panel assembly 2. Deflector 3. Motor assembly 4. Spring base assembly 5. Seth plate assembly 6. Guide assembly 7. Frame sub assembly 8. Seal tape 9. Rear drip 10. Stopper 11. Sunshade assembly 12. Drip rail assemb ...

Hyundai Kona (OS) 2018-2025 Service Manual: BJ Boot Components and components location
Components (1) [Gamma 1.6 T-GDI, Nu 2.0 MPI] 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Snap ring 12. TJ case ...