No
|
Item
|
Description
|
1
|
Washer Linked Wiper
|
| – |
If the washer switch is pressed ON for 0.06-0.2 second with
the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1
second after washer switch ON, and then the wiper relay
is turned OFF 0.7±0.1 second later.
|
| – |
If the washer switch is pressed ON for over 0.2 second with
the vehicle mode in IGN2, the wiper relay is turned ON 0.3±0.1
second after washer switch ON, and then the wiper relay
is turned OFF 2.5-3.8 seconds (wiper activates 2-3 times)
after washer switch OFF.
|
|
2
|
MIST Linked Wiper
|
| – |
If the wiper mist switch is pressed ON for 0.7 second with
the vehicle mode in IGN2, the wiper relay is turned ON,
and then OFF 0.7 second later.
|
| – |
If the wiper mist switch is pressed ON for over 0.7 second
with the vehicle mode in IGN2, the wiper relay is turned
ON, and then turned OFF 0.7 second after wiper mist switch
OFF.
|
|
3
|
Variable INT Wiper
|
| – |
If the INT wiper switch is turned ON with the vehicle mode
in IGN2, INT wiper operates intermittently (10 - 2.2 sec.)
based on the INT volume setting.
|
|
4
|
Rear Defogger Deicer Timer
|
| – |
If the defogger switch is turned ON with the vehicle mode
in alternator ON, defogger relay is turned ON for 20 minutes.
|
| – |
If the defogger switch is pressed one more time or if alternator
mode is turned OFF while the defogger is ON, then the defogger
relay is turned OFF.
|
|
5
|
KEY Inter Lock
|
| – |
If the KEY INTER LOCK switch is turned OFF with the vehicle
mode in IGN1 ON or ACC ON, the key solenoidenoid output
is turned ON and prevents the key from being removed.
|
|
6
|
ATM Shift Lock
|
| – |
If brake switch is turned ON with the vehicle mode in IGN1
ON and the shift lever in P position, ATM solenoid is turned
ON to unlock the shift lever.
|
|
7
|
Trunk Release
|
| – |
Trunk release relay is turned ON for 0.2±0.02 second if
TX trunk signal is received.
|
| – |
If trunk release switch is turned ON with all doors unlocked,
trunk releaserelay is turned ON for 0.2±0.02 second.
(However, Trunk release switch is ignored when in ARMWAIT,
ARM, REARM, or ALARM mode.)
|
| – |
If Interior trunk release switch is turned ON, trunk release
relay is turned ON for 0.2±0.02 second.
(However, Trunk release relay is NOT turned ON of the vehicle
speed is over 5km/h(3.1mi/h), or if the vehicle is in ARMWAIT,
ARM, REARM, or ALARM mode.)
|
|
8
|
Power Window Timer
|
| – |
Power wIndicatorow relay is turned ON when the vehicle mode
is switched to IGN ON.
|
| – |
When the vehicle mode is switched IGN ON → OFF, power
window relay is turned ON for 30 seconds.
|
| – |
If a door is opened during the 30 second power window relay
ON period, the power window relay is immediately turned
OFF.
|
| – |
If a door is opened and the vehicle mode is switched IGN
ON → OFF, power window relay is immediately turned OFF.
|
|
9
|
Seat Belt Reminder (Driver Side)
|
| – |
If Seat belt is not fastened, Indicator is turned ON at
the first IGN ON, then turned OFF when the seat belt is
fastened.
|
| – |
If the vehicle speed is over 20Km/h with Seat belt unfastened,
Indicator blinks and chime buzzer is activated for 100 seconds.
|
| – |
While the vehicle speed is over 20Km/h with the seat belt
fastened, then the seat belt is unfastened, Indicator blinks
and chime buzzer is activated for 100 seconds. (Remider)
|
| – |
If the Seat belt is fastened or the vehicle mode is switched
to IGN OFF while 100 sec. buzzer is activating, the Indicator
blinking and the buzzer is turned OFF.
|
| – |
If the vehicle mode is switched to IGN ON with Seat belt
unfastened, and vehicle speed exceeds 20Km/h with Indicator
ON, Indicator blinks and chime buzzer is activated for 100
seconds.
|
|
10
|
Seat Belt Reminder (Passenger Side)
|
| – |
If there is no one in the passenger seat, then the system
operates as if seat belt is fastened.
|
| – |
If Seat belt is not fastened, Indicator is turned ON at
the first IGN ON, then turned OFF when the seat belt is
fastened.
|
| – |
If the vehicle speed is over 20Km/h with seat belt unfastened,
Indicator blinks and chime buzzer is activated for 100 seconds.
|
| – |
While the vehicle speed is over 20Km/h with the Seat belt
fastened, then the seat belt is unfastened, Indicator blinks
and chime buzzer is activated for 100 seconds. (Remider)
|
| – |
If the seat belt is fastened or the vehicle mode is switched
to IGN OFF while 100 sec. buzzer is activating, the Indicator
blinking and the buzzer is turned OFF.
|
| – |
If the vehicle mode is switched to IGN ON with Seat belt
unfastened, and vehicle speed exceeds 20Km/h with Indicator
ON, Indicator blinks and chime buzzer is activated for 100
seconds.
|
|
11
|
Seat Belt Reminder (Rear)
|
| – |
If Seat belt is not fastened, Indicator is turned ON for
35 seconds at the first IGN ON, then turned OFF when the
seat belt is fastened.
|
| – |
If the vehicle speed is over 20Km/h with seat belt unfastened,
Indicator blinks and chime buzzer is activated for 35 seconds.
|
| – |
If the vehicle speed is over 20Km/h with the seat belt fastened,
then the seat belt is unfastened, Indicator blinks and chime
buzzer is activated for 35 seconds. (Remider)
|
| – |
If the seat belt is fastened or the vehicle mode is switched
to IGN OFF while 35 sec. buzzer is activating, the Indicator
blinking and the buzzer is turned OFF.
|
| – |
If the vehicle mode is switched to IGN ON with seat belt
unfastened, and vehicle speed exceeds 20Km/h with Indicator
ON, Indicator blinks and chime buzzer is activated for 35
seconds.
|
|
12
|
KEY Operated Warning
|
| – |
If the driver door is opened with the KEY IN, buzzer is
continuously activated at 1 second interval.
|
| – |
The buzzer is turned OFF if KEY OUT or the door is closed
while the chime buzzer is activated.
|
|
13
|
Parking Brake Warning
|
| – |
If the vehicle speed exceeds 5Km/h(3.1mi/h) while the vehicle
mode is in IGN1 and the parking brake is engaged, buzzer
is sounded until the parking brake is released.
(Buzzer activates at 0.6 second ON and 0.4 second OFF at
1 second interval until the parking brake is released.)
|
|
14
|
Decayed Room Lamp
|
| – |
If a door is opened with the vehicle mode in IGN OFF, the
room lamp is turned ON. If the door is closed, the room
lamp is remained ON for 30 seconds then turned OFF. (dimmer
2±0.2 sec.)
|
| – |
If the door is remained opened, the room lamp is remained
ON for 20 minutes, then turned OFF. (dimmer 2±0.2 sec.)
|
|
15
|
KEY Hole Illumination
|
| – |
Key illumination Lamp is turned ON if a door is opened while
the vehicle mode in IGN1 switch OFF, and the Key illumination
Lamp is turned OFF 30 seconds after the door is closed.
|
| – |
If the vehicle mode is switched to IGN1 ON while Key illumination
lamp is ON, then the lamp is immediately turned OFF.
|
| – |
If the vehicle mode is switched to ARMWAIT while Key illumination
lamp is ON, then the lamp is immediately turned OFF.
|
|
16
|
Tail Lamp Auto Cut
|
| – |
If Tail switch is switched OFF→ ON, the tail relay is
turned ON.
|
| – |
If Tail switch is turned OFF, then the tail relay is turned
OFF.
|
| – |
If KEY IN switch OFF & Tail switch ON & Driver Door OPEN
while in KEY IN switch ON & Tail switch ON, the tail relay
is turned OFF. (Auto OFF)
|
| – |
If KEY IN switch is turned ON after Auto OFF, then the tail
relay is turned ON. Tail relay does not turn back ON even
if the driver side door is opened → closed.
|
|
17
|
Head Lamp Escort
|
| – |
If the vehicle mode is switched from IGN1 to IGN1 OFF, and
the haed lamp is turned ON by haed lamp switch or autolight,
then the haed lamp is remained ON.
|
| – |
Haed lamp is turned OFF in case of any of the following
conditions.
|
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box.
(Refer to Body - "Glove ...
Other information:Hyundai Kona (OS) 2018-2024 Owners Manual: Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system on.
• If the winds ...
Hyundai Kona (OS) 2018-2024 Service Manual: Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09977-3R000
Disc & hub assembly bolt remover
Removal and installation of disc & hub assembly.
...
© 2018-2024 www.hkona.com
|
