Hyundai Kona: Driver attention warning (DAW) system / Resetting the system
Hyundai Kona (OS) 2018-2024 Owners Manual / Driving your vehicle / Driver attention warning (DAW) system / Resetting the system
- The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system.
- The Driver Attention Warning (DAW) system resets the last break time to
00:00 and the driver's attention level to 5 in the following situations.
- The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.v - The vehicle is stopped for more than 10 minutes. - The Driver Attention Warning (DAW) system operates again, when the driver restarts driving.
System setting and activation
System setting
The Driver Attention Warning (DAW) system is set to be in the OFF position,
when your vehicle is first delivered to you from the factory.
To turn ON the Driver Attention Warning (D ...
System standby
The Driver Attention Warning (DAW) system enters the ready status and displays
the 'Standby' screen in the following situations.
- The camera does not detect the lanes. - Driving speed remains under ...
Other information:
Hyundai Kona (OS) 2018-2024 Service Manual: Rear Driveshaft Components and components location
Components
1. Rear drive shaft (LH)
2. Coupling assembly
3. Rear differential carrier assembly
4. Rear drive shaft (RH)
5. Propeller shaft assembly
...
Hyundai Kona (OS) 2018-2024 Service Manual: ICM (Integrated Circuit Module) Relay Box Repair procedures
Inspection
Out Side Mirror Folding Relay
Check for continuity between the terminals.
1.
There should be continuity between the No.9 and No.19 terminals
when power and ground are connected to the No.10 and No.20 in the
ICM-B.
...
© 2018-2024 www.hkona.com
