Hyundai Kona: Fuel Delivery System / Fuel Pump Motor Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the fuel pump motor connector (A), and the fuel sender connector (B).

3.
Press the fixing hook (A) with a driver and then remove fuel sender (B) in the arrow direction.

4.
Remove the fuel feed tube (B) after removing the fix clip (A).
5.
Remove the head assembly (D) after removing the fix hooks (C).

6.
Remove the reservior-cup (B) after releasing the fixing hooks (A).

7.
Disconnect the ground cable (A).
8.
Disconnect the fuel pump motor connector (B).

9.
Remove the snap pin (A), and then remove the fuel pressure regulator (B).

10.
Remove the pre-filter (B) after releasing the fixing hooks (A).

11.
Remove the fuel pump motor (B) in the arrow direction.

Installation
1.
Install in the reverse order of removal.
Fuel Filter Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel pump motor connect ...

Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel sender connector ( ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Liftgate Assembly Repair procedures
Replacement    • Wear gloves to protect hands from injury.    • ...

Hyundai Kona (OS) 2018-2024 Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the connection hose (9) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the recomended t ...

© 2018-2024 www.hkona.com