Hyundai Kona: Seat warmers and air ventilation seats / Front air ventilation seat
The air ventilation seats are provided to cool the front seats by blowing air
through small vent holes on the surface of the seat cushions and seatbacks.
When the operation of the air ventilation seat is not needed, keep the switches
in the OFF position.
While the engine is running, push the switch to cool the driver's seat or the
front passenger's seat (if equipped).
- Each time you push the switch, the airflow changes as follows:
- When pressing the switch for more than 1.5 seconds with the air ventilation
seat operating, the operation will turn OFF.
- The air ventilation seats defaults to the OFF position whenever the ignition
switch is placed to the ON position.
NOTICE
To prevent damage to the air ventilation seat:
- Use the air ventilation seat ONLY when the climate control system is
on. Using the air ventilation seat for prolonged periods of time with the climate
control system off could cause the air ventilation seat to malfunction.
- Never use a solvent such as paint thinner, benzene, alcohol or gasoline
to clean the seats.
- Avoid spilling liquids on the surface of the front seats and seatbacks;
this may cause the air vent holes to become blocked and not work properly.
- Do not place materials such as plastic bags or newspapers under the
seats. They may block the air intake causing the air vents to not work properly.
- Do not change the seat covers. It may damage the air ventilation seat.
- If the air vents do not operate, restart the vehicle. If there is no
change, we recommend that you have your vehicle inspected by an authorized HYUNDAI
dealer.
Seat warmers are provided to warm the seats during cold weather.
WARNING
The seat warmers can cause a SERIOUS BURN, even at low temperatures and especially
if used for long periods of time.
Passenger ...
This section describes how to use the seat belts properly. It also describes
some of the things not to do when using seat belts. ...