Hyundai Kona: Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and operation

Hyundai Kona (OS) 2018-2024 Service Manual / Restraint / Airbag Module / Driver Airbag (DAB) Module and Clock Spring Description and operation

Description

•	Driver Air Bag (DAB) DAB is installed in the steering wheel, and electrically connected to the SRSCM via clock spring. It is deployed during frontal impact to protect the driver.

•

Clock Spring

Clock spring delivers actuation signal, generated by the sensors installed in the front and right/left sides of a vehicle, to the inflator (gas generator) of the driver air bag module via internal cable.

It also delivers actuation signal of the steering wheel remote control switch and horn to relevant systems via internal cable.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Driver Airbag (DAB) Module and Clock Spring Components and components location

Components 1. Driver Air Bag (DAB) 2. Steering Wheel 3. Clock Spring ...

Driver Airbag (DAB) Module and Clock Spring Repair procedures

Removal 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. Putting in a flat tool ...

Other information:

Hyundai Kona (OS) 2018-2024 Service Manual: Rear Combination Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the outside rear combination lamp assembly after disconnecting the connector. 3. Remove the bulb (A ...

Hyundai Kona (OS) 2018-2024 Owners Manual: Prerequisite for activation
The ISG system operates in the following situations. - The driver's seatbelt is fastened. - The driver's door and the hood are closed. - The brake vacuum pressure is adequate. - The battery is sufficiently charged. - The outside temperature is between -20 °C and 35 °C (-4 °F and 95 °F). - The ...